Ducati MULTISTRADA 1200S Скачать руководство пользователя

Страница: 204 / 311

Washing the garment: Gore-Tex jacket, only.

Wash the garment referring to the instructions

provided on the garment itself or in the specific

informative notes.

Washing the garment: Waistcoat, only

The waistcoat must be exclusively washed using soft

cloths dampened with water or neutral soapy water

without softener.

Remove the soapy solution using only a soft cloth

dampened with clean, cold water.

Do not rub with abrasive materials and do not leave

the garment to soak.

Protect the electronic parts prior to washing to

prevent water from reaching it.

Hang the garment to dry, protecting it against direct

exposure to light and heat sources. At any rate,

always refer to the indications provided on the

garment itself or in the specific informative notes.

203

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Похожие инструкции для MULTISTRADA 1200S

Бренды по названию

Популярные бренды

Ducati MULTISTRADA 1200S, Руководство пользователя

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Похожие инструкции для MULTISTRADA 1200S

Бренды по названию

Популярные бренды