Ducati MULTISTRADA 1200S Скачать руководство пользователя страница 156

Страница: 156 / 311

Duplicate keys

If you need any duplicate keys, contact the Ducati

Service network with all the keys you have left.

The Ducati Service Centre will program all the new

keys as well as any keys you already have.

You may be asked to provide proof that you are the

legitimate owner of the motorcycle.

The codes of any keys not submitted will be wiped

off from the memory to make those keys

unserviceable in case they have been lost.

Immobilizer override procedure

This procedure makes it possible to "temporarily" turn

on the motorcycle if the HF (Hands Free) System is

not working.

Note

The PIN CODE function must be activated by

the user by entering your 4-digit PIN in the instrument

panel, otherwise the motorcycle cannot be started

temporarily in the case of a malfunction.

Warning

The motorcycle owner must activate (store) the

PIN code; if there is already a stored PIN, contact an

Authorised Ducati Dealer to have the function "reset".

To perform this procedure, the Authorised Ducati

Dealer may ask you to demonstrate that you are the

owner of the motorcycle.

155

Содержание MULTISTRADA 1200S
























































































































































































































































































































Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы:

Ducati MULTISTRADA 1200S, Руководство пользователя, Страница: 156 / 311

Результаты поиска

Содержание MULTISTRADA 1200S

Отзывы: