E
17
Operation
When the ignition key is turned from ON to OFF, the
protection system activates the engine lock. When the
ignition key is turned from OFF to ON to start the engine:
1) if the code is recognized, the warning light (6, fig. 4), on
the instrument panel flashes briefly; the protection system
has recognized the code and disables the engine lock.
When you press the START (3, fig. 14.1) button, the engine
starts up.
2) If the warning light (6, fig. 4) or EOBD light (7, fig. 4)
remain lit, the code has not been recognized. In this case,
it is advisable to turn the ignition key back to OFF and then
to ON again. If the engine still does not start, try using
another black key.
If the engine will still not start, contact the DUCATI Service
network.
3) If the light (6, fig. 4) keeps flashing, it means that a fault
indication from the immobilizer system has been cleared
(for example, by means of the release procedure using
the throttle). Turn the key to OFF and back to ON; the
immobilizer light should return to its normal state (see
point 1).
Warning
Sharp knocks can damage the electronic
components inside the key.
Use only one key during the procedure. The use of
different keys could prevent the system from
recognizing the code in the inserted key.
Duplicate keys
If you need additional keys, contact the DUCATI Service
network with all the keys you have left and your CODE CARD.
DUCATI Service will program new keys and re-program
your original keys, up to a maximum of 8 keys.
The DUCATI Service may ask for proof that you are the
legitimate owner of the motorcycle.
The codes for any keys not present during the memory
programming procedure are cancelled, to ensure that any
keys that may have been lost can no longer be used to
start the engine.
Notes
If you sell your motorcycle, do not forget to give all
keys and the CODE CARD to the new owner.
Содержание MONSTER S2R
