DTS XD10P, Инструкция по установке и эксплуатации

Страница: 57 / 94

XD10P Cinema Audio Processor, Installation and Operation Version 1.0
4.7. Outputs Tab
During the alignment process, the Outputs tab is where the output levels are set for the various channels.
Signal
generator
This channel will receive Pink
from Signal Generator
Figure 4-27. Outputs screen
Signal Generator –at the bottom of the screen, it can be set to four different modes. To assign a
particular channel to receive generator output, a checkbox is available below the slider. These checkboxes
may also be utilized to
Mute or Invert the channel.
If a channel is muted in the Outputs tab, it will be highlighted in RED in the Equalizer tab. A channel can
be unmuted only in the Outputs tab.
Figure 4-28. When channel is muted in Outputs, it will be highlighted in red in Equalizer.
The generator output assignment will carry over from one channel to the next. This saves time and effort
because you do not have to turn it on and off for each channel.
This is how it works:
4. Software Description Document #: 9301E855001.0 4-16