XD10P Cinema Audio Processor, Installation and Operation
Version 1.0
Regulatory Notices
EMI Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Canadian Department of Communications compliance statement:
This equipment does not exceed Class A limits per radio noise emissions for digital apparatus set in the
Radio Interference Regulation of the Canadian Department of Communications. Operation in a
residential area may cause unacceptable interference to radio and TV reception, requiring the owner or
operator to take whatever steps are necessary to correct the interference.
"Avis de conformité aux normes du ministère des Communications du Canada:
Cet équipement ne depasse pas les limites de Classe A d'emission de bruits radioélectriques pour les
appareils numériques telles que perscrites par le règlement sur le brouillage radioélectrique établi par le
ministère des Communications du Canada. L'exploitation faite en milieu résidentiel peut entrainer le
brouillage des réceptions radio et télévision, ce qui obligerait le propriétaire ou l'opérateur à prendre les
dispositions nécessaires pour en éliminer les causes."
CE
“Warning” This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Unpacking and Inspection
The packaging is designed for typical shipping and handling. Upon receipt of shipment, check for signs
of damage and report all damage to the carrier. All shipments made from DTS are the customer's
responsibility once they leave our premises.
Before installation it is suggested that a complete inventory be taken to minimize problems or questions
during installation. Additionally, save all packing material until installation is complete in the unlikely
event that a component(s) requires return to the factory. Use the packing slip that came with your unit to
verify received inventory.
The box should include the following items. If anything is missing, notify your dealer or the factory:
o
XD10P Cinema Audio Processor
o
Power cord
o
Backup (AUX) Power Supply
o
Screw-terminal plugs (4), attached to XD10P rear panel (Phoenix connectors)
o
XD10P Connector Hardware Kit 9003E95000
o
XD10P System Software Disc 9311E92200V1.0
o
This manual
Document #: 9301E855001.0
vi
Содержание XD10P
Страница 13: ...XD10P Cinema Audio Processor Installation and Operation Version 1 0 Document 9301E855001 0 xii ...
Страница 80: ......
