DTS XD10P, Инструкция по установке и эксплуатации

Страница: 27 / 94

XD10P Cinema Audio Processor, Installation and Operation Version 1.0
3.4.1. Slit EQ Adjustment
Test Materials Required:
•
Pink noise test film
This procedure compensates for any deficiencies or imperfections that may be present in the mechanical
alignment (in the projector). Prior to this adjustment, the installer should have physically moved the
optical reader lens of the projector for the best focus and azimuth, which will result in better outcomes in
slit loss. See
Appendix E .
Select the Inputs tab.
1. Confirm that all channels are muted.
2. Load the Pink Noise test film into the projector and start the projector.
3. Click the Power On button and a bar graph (or line graph) will display across the Analyzer
screen.
4. Select the Bars or Lines option button to select the type of graph to display on the spectrum
analyzer (SA).
5. Select Left and/or Right channel . (In this example, both Left Ch and Right Ch are selected.)
6. The interval for the Y-axis defaults to 10 dB/div. We recommend you not change this.
Power ON
Select Bars
or Lines
Select Left
and/or Right
channel
Interval for Y-
axis divisions
Double-click to
enlarge
Move the Slit
EQ slider
Figure 3-6. Inputs screen, showing bar graph on SA.
7. Double-click on the equalizer screen to enlarge it for a better view.
3. Using XD10P Setup
Document #: 9301E855001.0 3-4