DTI GmbH & Co. KG
Here you choose the type of coil used. The puls power will be adapted for the coil
automatically if the setted power is too high. The type of coil has been printed to the
coil lable e. g. can be recognized by the diameter.
If you select the proper coil and press F3 this type will be stored. If you leave the
menue by F4 or F5 you will receive a message.
You will now be able to change the coil when the detector is switched on. Only if you
see this message, changing is allowed. Afterwards the instrument only needs some
time for stabelizing the coil. If you change from a higher power coil to a lower power
coil the power will be adapted, but not rized again automatically if you go back to a
higher power coil. So you should store the settings before changing.
Seite 18 von 31
