DTI GmbH & Co. KG
1. Programm Speichern / Program Storing
Below this menue you can store up to 25 programs. The chosen parameters
will be stored below the chosen program number and remain being stored
when the detector is switched off.
2. Programm Laden / Program Loading
Below this menue you can activate the stored program.
3. This paramter is identical to the active parameter and can be changed here.
4. This paramter is identical to the active parameter and can be changed here.
5. Below this parameter you can change the puls power.
6. This paramter is identical to the active parameter and can be changed here.
7. This paramter is identical to the active parameter and can be changed here.
8. At this menue you can change the active display. The less komponents the
faster the display speed.
1. Number Display, Bargraph, Spectrum and Detector Display
2. Number Display, Bargraph, and Detector Display
3. Number Display, Bargraph, and Spectrum
4. Number Display and Bargraph
9. Programminfo – Program Info allows viewing the program memories.
Seite 19 von 31
