DTI GmbH & Co. KG
In case of a problem with the communication of both internal processors it can hap-
pen that wrong datas are being used. That can happen because of some influence
from outside of by switching on and off in a short time by accident. In this case use
F3 – reset.
Coil neccessary. System has been startet without coil. Please switch off.
When you choose a start with coil without having connected a coil this message will
be displayed. The system switches to the demonstration mode.
Operation Display
State of
Rechargable
Battery
Record of
measured data
Program
setting
Non Ferrous metal
Spectrum
Ferrous metal
Active
Parameter
All metals
The detector now is active and what you are seeing is the operation display.
Seite 10 von 31
