DSEGenset DSEA108, Руководство оператора

Страница: 5 / 58

Introduction
Page 5 of 58 057-281 ISSUE: 1
1 INTRODUCTION
WARNING!: LIVE PARTS exist within the AVR. To avoid damage to persons and/or
property, only qualified personnel, having full understanding of the application must install the
product.
This document details the installation requirements of the DSEA108 Auxiliary / Shunt power Digital
Automatic Voltage Regulator. The manual forms part of the product and should be kept for the entire
life of the product. If the product is passed or supplied to another party, ensure that this document is
passed to them for reference purposes.
This is not a
controlled document. You will not be automatically informed of updates. Any future
updates of this document will be included on the DSE website at www.deepseaplc.com
For details on configuring the DSEA108 using a PC, refer to the relevant configuration software
manual.
1.1 CLARIFICATION OF NOTIFICATION
NOTE:
Highlights an essential element of a procedure to ensure correctness.
CAUTION!
Indicates a procedure or practice, which, if not strictly observed, could result in
damage or destruction of equipment.
WARNING!
Indicates a procedure or practice, which could result in injury to personnel or
loss of life if not followed correctly.
1.2 GLOSSARY OF TERMS
Term Description
AVR Automatic Voltage Regulator.
A device that automatically adjusts alternator excitation, to maintain the desired
generator output voltage and reactive power levels.
CAN Controller Area Network
Vehicle standard to allow digital devices to communicate to one another.
CT Current Transformer
An electrical device that takes a large AC current and scales it down by a fixed
ratio to a smaller current.
DM1 Diagnostic Message 1
A DTC that is currently active.
DM2 Diagnostic Message 2
A DTC that was previously active on the module’s internal memory.
DTC Diagnostic Trouble Code
The name for the entire fault code sent by a J1939 CAN device.
FMI Failure Mode Indicator
A part of DTC that indicates the type of failure, e.g. high, low, open circuit etc.
PGN Parameter Group Number
A CAN address for a set of parameters that relate to the same topic and share
the same transmission rate.
SPN Suspect Parameter Number
A part of DTC that indicates what the failure is, e.g. oil pressure, coolant
temperature, turbo pressure etc.