DSE Model 5510 Autostart Control and Instrumentation System Operators Manual
057-015 5510 OPERATING MANUAL ISSUE 11 07/07/09 AM 47
8 INSTALLATION INSTRUCTIONS
The model DSE 5510 Module has been designed for front panel mounting. Fixing is by 4 clips for
easy assembly.
8.1 PANEL CUT-OUT
220.00mm
(8.7”)
Maximum panel thickness – 8mm (0.3”)
In conditions of excessive vibration, the module should be mounted on suitable anti-vibration
mountings.
8.2 COOLING
The module has been designed to operate over a wide temperature range -30ºC to +70ºC.
Allowances should be made for the temperature rise within the control panel enclosure. Care should
be taken NOT to mount possible heat sources near the module unless adequate ventilation is
provided. The relative humidity inside the control panel enclosure should not exceed 93%.
8.3 UNIT DIMENSIONS
Panel cutout 220mm x 160mm ( 8.7” x 6.3”)
160.00mm
(6.3”)
