manualshive.com logo in svg

DSC Envoy NT9010, Руководство по установке, Страница: 50 / 64

Поделиться
Скачать
DSC Envoy NT9010 Скачать руководство пользователя страница 50

C h a p t e r   2 :   A d v a n c e d   P r o g r a m m i n g

4 6

Information regarding the programming of the Command Keys must come from the cen-
tral station to which you will be reporting.
Once you have talked to the central station, program the telephone keys to operate as
they require.

Talk/Listen-in on Phone Lines 1/3 . . . . . . . . . . . . . . . . . . .  Section [381], option [5]
Talk/Listen-in on Phone Line 2  . . . . . . . . . . . . . . . . . . . . .  Section [381], option [6]
Port Assignments . . . . . . . . . . . . . . . . . . . . . . . . .  Sections [802]-[10] to [802]-[13]
Enable Talk/Listen-in on Zones 1-32 . . . . . . . . . . .  Sections [802]-[50] to [802]-[53]
Talk/Listen-in Event Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Section [802]-[54]
Audio Duration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Section [802]-[55]
Telephone Key Programming . . . . . . . . . . . . . . . . . . . . . . . . . . .  Section [802]-[40]
Telephone Mode Key Programming . . . . . . . . . . . . . . . . . . . . . .  Section [802]-[41]

2.3.14Downloading*

Downloading allows programming of the entire system via a computer, modem and tele-
phone line. All functions and features, changes and status, such as trouble conditions
and open zones can be viewed or programmed by downloading.

*Downloading cannot occur when system is armed.

NOTE:

 When power is applied to the system, a 6 hour downloading window

will be enabled. This will allow you to perform downloading without having
to do any keypad programming.

When an event occurs that the system is programmed to communicate to the central sta-
tion, the system will disconnect from the downloading computer and report the event.
This will happen for all events except test transmissions.

If the 

Answering Machine/Double Call 

option is enabled (or during the first 6 hours

after power up) the system will answer incoming calls for downloading provided the fol-
lowing conditions occur:

1. The system hears one or two rings, then misses a ring.

2. The system starts the 

Answering Machine Double Call Timer

.

3. If the system hears another ring before the timer expires, it will answer on the first

ring of the second call.

4. The system will immediately go on line and begin the download process unless the

Call Back

 option is enabled. 

5. If Call Back is enabled, the system and computer will both hang up. The system

will then call the 

Download Computer Telephone Number 

and wait for the

computer to answer. Once the computer answers, downloading will begin.

If the 

User Enabled DLS Window 

option is ON, the user can activate the downloading

feature  by entering [

✱

][6][Master Code][5].

✱✱

Except for the first six hours after power up, the system will not answer incoming calls

unless the 

Answering Machine/Double Call 

option is enabled, or the

 Number of

Rings

 is programmed to be more than [0].

If the 

User-Initiated Call-Up

 option is enabled, the user can have the system initiate a

call to the downloading computer by pressing [

✱

][6][Master Code][6].

The 

Download Access Code

 and 

Panel Identifier Code

 are for security and proper

identification. Both the system and the computer file should have the same information
programmed before attempting to download.

Содержание Envoy NT9010

































































Отзывы:

Нет отзывов