SECTION 3
GETTING STARTED
PAGE 58
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
Ins talling and C harging the B atteries
The first step to getting your X7 operating is to install and charge the batteries. The batteries are
inserted into slots or “bays” on each side of the computer as shown in Figure 25.
The batteries
are identical and can be installed in either bay. Follow the procedure in Table 2 to install the
batteries.
NOTE
If you do not plan to use your computer right away, we recommend
you fully charge your batteries and then remove and store them in
a safe place until needed (see
How to Store Batteries When Not in
Figure 25. X7 Batteries Positioned for Installation
BATTERY
BAY #1
BATTERY
BAY #2
DC POWER
INPUT JACK
BATTERY
LATCH
LOCKING
SLOTS