SECTION 2
LEARNING ABOUT YOUR ARMOR X7
PAGE 49
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
V ehic le Doc k Mounting S olutions
The X7 vehicle dock is rugged and light weight and can be adapted to just about any mounting
situation from console and dashboard installation to bulkhead and cab roof installation. Figure
19 shows some sample mounting solutions. Other types are available.
Figure 19. Examples of X7 Vehicle Dock Mounting Solutions
B reak out B ox
The X7 breakout box (P/N
9800F26600-0000
) is used with both the desk dock and the vehicle
dock. When used with the desk dock, it is plugged into a connector in the base of the desk dock
and secured to the back with four hex screws (see Figure 17). In a vehicle installation, the
breakout box is mounted away from the dock and connected by a 6 ft 25-pin cable to the
connector on the bottom of the dock.
The breakout box provides connections for 3 USB ports, an RJ45 Ethernet port, an RS-232
serial port and a DC power input jack. Two internal GPIO ports are also provided.
Figure 20. X7 Breakout Box
OVERHEAD
MOUNT
FLOOR
MOUNT
UNIVERSAL
MOUNT