SECTION 5
YOUR ARMOR X7 SOFTWARE
PAGE 110
9711-26400-0001
EXPORT CONTROLLED – SEE PAGE 3
Rev A
B uttons S etup Dialog W indow
The Buttons Setup dialog window is shown in Figure 54. It allows you to assign two different
functions for each programmable button (or “PB”) labeled P1, P2 and P3. These buttons are
located on the right control panel (see Figure 2).
The first function is activated by pressing and releasing a PB (
P1, P2, P3
). The second function
is a combo function activated by first pressing and releasing the
Fn
button and then pressing
and releasing a PB (
Fn+P1, Fn+P2, Fn+P3
). This provides a total of 6 individual functions that
can be activated using the PBs. The function currently programmed is shown in the field next to
the PB or the PB combo.
NOTE
If you exit ARMORutils completely, you will temporarily lose programmable
button functionality. Restart ARMORutils to reactivate the PBs.
Figure 54. ARMORutils Buttons Settings Dialog
PB
PB
COMBO