Dräger PulmoVista 500, Руководство пользователя, Страница: 5 / 56

Table of Contents
| 5
Page
3. useful tools and tIps
32
3.1. Contour of ventilated area
3.2. Negative impedance changes
3.3. Filtration
3.4. Save screenshot and record EIT data
3.5. Coupling of a Dräger ventilator with Pulmovista
®
500
3.6. Frame rate
32
34
35
37
38
39
Table of Contents
Page
IntroductIon
6
1. prepare the devIce for the clInIcal use
7
1.1. Start and Device Check
1.2. Selection and application of the electrode belt
1.2.1. Choosing the right belt size
1.2.2. Attach patient cable to electrode belt
1.2.3. Prepare the patient
1.2.4. Prepare the electrode belt
1.2.5. Positioning of the electrode belt on the thorax
1.2.6. General procedure when attaching the belt
1.3. Signal Check
1.4. Settings before starting an EIT measurement
1.5. Start the EIT session
1.6. Check the correct electrode belt position
1.7. Special Case: 15-electrode mode 7
8
8
10
11
12
12
12
16
17
17
18
20
2. dIfferent vIews and theIr specIal propertIes
21
2.1. Main and Fullscreen view
2.1.1. Referencing
2.1.2. Regions of Interest (ROIs)
2.2. Trend views – End-inspiratory and End-expiratory
2.3. Diagnostic View
2.3.1. Conduct analysis dialogue window
2.3.2. Results of the analysis 21
23
24
26
28
28
30
4. clInIcal applIcatIon
4.1. Identify responder or non-responder to a recruitment-maneuver (RM)
4.2. Identify possible de-recruitment and overdistension
4.3. Influence of positioning on the distribution of ventilation
4.4. Patient proning
4.5. Intubation Check
4.6. Patient with pleural effusion
4.7. ΔEELI-trend after suction
5. eIt-termInology
6. contraIndIcatIons
39
40
43
45
46
47
47
48
49
51