Dräger PulmoVista 500 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 56

Dräger PulmoVista 500 Скачать руководство пользователя страница 42

42 |

2. Identify responder or non-responder:

What to look for in the End-inspiratory Trend View?

The following table shows two different results of a recruitment maneuver.
The first case shows a responder with a PIP of 34 mbar to open the dorsal areas
in ROI 4 (TV 1 % => 13 %). The differential image highlights this increase of
ventilation in the blue areas.
In contrast, the second case, a non-responder, shows only a minimal increase in
dorsal ventilation in ROI 4 (TV 4 % => 5 %), despite the relatively high PIP of 41
mbar. A significant increase in ventilation can be seen in ROI 3, due to a significant
increase in tidal volume from 434 ml to 861 ml.
In both cases a PEEP of 15 mbar was applied.

Responder:

TV in ROI 4 is significantly higher during the RM than before (e.g. TV ROI
4 – 10 %, and the differential image shows light blue color in ROI 4.

Non-Responder:

Small or no change in ROI 4 (± 0 – 2 %)

D

-11947-2017

«
...
40
41
42
43
44
...
»

Содержание PulmoVista 500

























































Отзывы:

Нет отзывов