Dräger PulmoVista 500 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 56

Dräger PulmoVista 500 Скачать руководство пользователя страница 30

30 |

2.3.2. rESULTS OF ThE anaLYSIS

The  results  of  the  PEEP  trial  analysis  support  the  selection  and
personalization  of  PEEP.  Regional  compliance  images  show  the  influence
of  PEEP  on  lung  mechanics.  The  ›Customized  analysis‹  can  be  used  to
evaluate various therapeutic interventions.

At constant driving pressures an increase/decrease in ventilation can be

interpreted as an increase/decrease of regional compliance (C).

1

2

3

4

5

6

1

Global impedance waveform and sections. If available, trend parameters are

displayed: PEEP in green and EIP (or PIP) in pink.

2

Tidal Image for every displayed section.

3

Compliance loss image for every displayed section.

4

Areas in which a regional ventilation delay was detected and corresponding

RVD parameter, displayed in yellow.

5

Diagram with the numeric values of all sections depending on the settings and

analysis type.

6

Create report: An image and a text file are created containing the entered

parameters, the event list, all available analysis parameters and MEDIBUS values,

and a screenshot of the analysis. (Only active if a USB mass storage device is

connected). This report is meant to be used for documentation purposes.

D

-30761-2017

«
...
28
29
30
31
32
...
»

Содержание PulmoVista 500

























































Отзывы:

Нет отзывов