Dräger PulmoVista 500 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 56

Dräger PulmoVista 500 Скачать руководство пользователя страница 3

| 3

© 2018 Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55 · 23558 Lübeck
All rights, in particular the right of
reproduction, distribution and translation, reserved.
Printed in Germany

This manual is intended to provide additional guidance for the use of PulmoVista

®

500.

The information and data provided in this manual are subject to technical changes.
For the use of the Dräger products, the instructions for use enclosed with the products
always apply and are not in any way replaced or otherwise superseded by this manual.

Medical knowledge is subject to constant change due to research and clinical experience.
The authors of this publication have taken utmost care to ensure that all information
provided, in particular concerning applications and effects, is current at the time of
publication. This does not, however, absolve readers of the obligation to take clinical
measures on their own responsibility.

The use of registered names, trademarks, etc. in this publication does not imply, even
in the absence of a specific statement, that such names are exempt from the relevant
protective laws and regulations.

«
1
2
3
4
5
...
»

Содержание PulmoVista 500

























































Отзывы:

Нет отзывов