Dräger PulmoVista 500 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 56

Dräger PulmoVista 500 Скачать руководство пользователя страница 39

Cllinical Application

| 39

3.6. FraME raTE

The dynamic EIT image continuously shows relative impedance changes. The
high temporal resolution of this method allows for very precise analysis of
individual phases during inspiration and expiration as well as the detection of
rapid changes in intrathoracic processes. This is useful for assessing regional
ventilation even at high respiratory rates, such as HF ventilation, as well as for
measuring higher-frequency processes, such as cardiac activity. In the ›EIT
Settings‹ menu, you can adjust the frame rate, i.e. the number of EIT images
generated per second.

By default, the frame rate is 20 Hz

Adjustable frame rate = 10 – 50 Hz (pictures /s)

4. Clinical application

Chest EIT opens up new possibilities for everyday clinical practice in addition
to already established technologies. For more than 10 years, the significance
of  EIT  has  been  demonstrated  by  numerous  clinical  studies.  In  this  regard,
after  years  of  research  the  next  logical  step  is  the  transfer  of  EIT  into  the
clinical  routine.  EIT  provides  new  and  additive  information  and  allows  the
personalization of ventilation.

«
...
37
38
39
40
41
...
»

Содержание PulmoVista 500

























































Отзывы:

Нет отзывов