Dormakaba LA GARD 700 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 76

background image

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 9

2.1 Safe Lock Hardware

The LA GARD System components have been tested as compatible with the LA GARD system and should not
be substituted. Consult each component’s individual documentation for proper mounting, connectivity, and
installation. The safe itself must be appropriate for the lock hardware to provide maximum security; certain
makes and models of safes may not be appropriate for this LA GARD safe lock system. If unsure, consult with
dormakaba USA Inc. Sales or Support for further information.

2.2 System Components

Each system may differ depending on customer requirements. The sub-sections outlined below cover the full
suite of the LA GARD safe lock system.

2.2.1 Keypad

The Keypad comes in two varieties: Display and non-Display. The Display variant shows messages on screen
while the non-Display version implements a series of LED flashes and beeps for messages. The Keypad is the
user interface for the entire system. All Keypads are available in both Tamper Evident and Serviceable options,
which will impact how the keypad is physically mounted. Refer to the Keypad Installation Guide (Document
#7033.0322) for more information.

2.2.2 Multiplexer

The Multiplexer is used in multi-lock systems and allows multiple safe locks to connect with the Keypad. Refer to
the Multiplexer Installation Guide (Document #7038.0521) for more information. The Multiplexer is not UL
evaluated. (Item/Order # 704033, “Multiplexer”)

2.2.3 Safe Lock

The safe lock is either a dead bolt, a spring bolt, or a swing bolt, that locks and unlocks when the Keypad
receives correct user credentials. This lock system comes in many varieties depending on the application. Refer
to the Safe Lock Installation Guide (Document # 7034.1121) for more information.

2.2.4 AC Adapter

The AC Adapter can be used to power the System where batteries alone would not be appropriate. Refer to the
AC Adapter Installation Guide (Document # 7037.0320) for more information. (Item/Order # 701107, “AC-
Power Supply Multi-Adapter”)

2.2.5 Battery Box

The Battery Box can serve as the secondary power source to the LA GARD System. Refer to the Battery Box
Installation Guide (Document #7035.0421) for more information. The Battery Box is not UL evaluated.
(Item/Order # 704055, “Battery Box”)

2.2.6 Alarm Box

The Alarm Box is a hard-wired external alarm device. If used, the Alarm Box must be plugged into the BAT port
of Lock #1. The Alarm Box allows for a remote disable input that can block the open command to the lock if

«
...
8
9
10
11
12
...
»

Содержание LA GARD 700 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для LA GARD 700 Series

Бренд: Yale Страницы: 5

Бренд: Lincoln Electric Страницы: 39

Бренд: Lincoln Electric Страницы: 47

Бренд: Hasler Страницы: 78

Бренд: Sunheat Страницы: 6

Бренд: Miller Страницы: 62

Бренд: Myson Страницы: 2

Бренд: Solter Страницы: 16

CADB/T-HE PRO-REG Series

Бренд: S&P Страницы: 72

Бренд: Elettro CF Страницы: 38

Бренд: Aircalo Страницы: 28

Бренд: STAMOS Страницы: 5

Бренд: Heat&Glo Страницы: 33

Бренд: Snap-On Страницы: 28

Бренд: GÜDE Страницы: 60

UNIVERSAL GK 50

Бренд: Dormakaba Страницы: 8

CITOARC 1450 FORCE

Бренд: Oerlikon Страницы: 76

Бренд: Razorweld Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды