Dormakaba LA GARD 700 Series Скачать руководство пользователя страница 64

Страница: 64 / 76

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 63

1.1.4.1

7 July 2021

Further improvements to startup/recovery issues

resulting from static discharge

1.1.4.2

23 Sept

2021

In some situations, TDO fob usage can be performed

when lock has time delay override privilege off.

1.1.5.7

28 Sept

2021

Added robustness in handling programming after a

firmware update (power cycle no longer required after

update)

1.1.6.2

16 May 2022

Added support for alternate flash IC. No functional

changes

1.2.2.3

3 Oct 2022

Added additional audits

Forced Combination Change

Access Schedule changed

Access Schedule Lock Assignment changed

Holiday Change

Observe DST setting changed

Added time lock restrictions for when the system is in a
time locked situation for the Manager to be able to
immediately change the definition.

Added ability to change combination on uninstalled
display model keypads.

Added feedback when Wrong Try Penalty period has
completed.

Added ability to see system information if not installed
for keypad models with a display.

Added enforcement for Master User to change
combination when installed. Also that the Master User
cannot set combo back to the factory default.

Added other informative messages for keypad models
with a display.

Extended time between key presses before keypad
goes to sleep.

Added support for FW update when not installed.

Added support to change combo when uninstalled for
non-display keypad models.

Newly added users will now have open and audit
privileges by default.

Added support for Observe DST setting for the 702
model.

Added Reset Box blink in all cases when reset is
attempted.

Various other minor bug fixes.

NOTE: When one of the devices (keypads or locks) is at this

firmware level, the other devices must be updated to be

configurable via software

Содержание LA GARD 700 Series













































































Результаты поиска

Содержание LA GARD 700 Series

Отзывы:

Похожие инструкции для LA GARD 700 Series

Бренды по названию

Популярные бренды

Dormakaba LA GARD 700 Series, Руководство пользователя системы

Результаты поиска

Содержание LA GARD 700 Series

Отзывы:

Похожие инструкции для LA GARD 700 Series

Бренды по названию

Популярные бренды