Dormakaba LA GARD 700 Series Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 76

background image

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 18

1.

Enter and Authorized User ID and Combination.

2.

Navigate through the Main Menu and select “System”.

3.

Select “Sys Info” from the sub-menu.

4.

Select between “Keypad” or “Lock”.

5.

If “Keypad” is selected, the following information is available on screen:

•

“Batt Status” – Displays battery level with a percentage

•

“FW version” – Shows the current firmware version on the Keypad

•

“Model” – Displays the Model # of the Keypad

•

“S/N Part 1” and “S/N Part 2” – Shows the serial number of the Keypad (divided between two
screens)

6.

If “Lock” is selected, the following information is available on screen:

•

“FW version” – Displays the current firmware version on the safe lock

•

“S/N Part 1” and “S/N Part 2” – Shows the serial number of the safe lock (divided between two
screens)

•

“Port | Lock” – Represents the Port and Lock #s

•

“Open Count” – Shows how many times the safe lock was opened

3.3.2 Backlight Mode

The Backlight illuminates whenever a key is pressed on the Keypad. By default, the Backlight setting is Off to
conserve battery power (if applicable).

Note:

This function is not available on the 701 series Keypad.

3.3.2.1 Backlight Mode – Display Keypad

Follow these steps to toggle the Backlight Mode On and Off on a Display Keypad:

1.

Enter an Authorized User ID and Combination.

2.

Navigate through the Main Menu and select “System”.

3.

Select “Backlight” from the sub-menu.

4.

Select between “On” and “Off” to Enable/Disable Backlight Mode.

5.

“Success Mode updated” will appear on screen and the Keypad will beep three times and flash a green
LED once complete.

3.3.2.2 Backlight Mode – 702 Keypad (Non-Display)

Follow these steps to toggle the Backlight Mode On and Off on a 702 non-Display Keypad:

1.

Using the Keypad, input #40 + Authorized User ID and Combi Off (0) or On (1) + <return key> (←).

2.

The Keypad will beep three times and flash a green LED once complete.

3.3.3 Buzzer Mode

The Buzzer provides sound to signal specific functional outcomes. The Buzzer Mode is active (on) by default. It
is recommended that the Buzzer is left on for Non-Display Keypads.

3.3.3.1 Buzzer Mode – Display Keypad

Follow these steps to toggle the Buzzer Mode On and Off on a Display Keypad:

1.

Enter an Authorized User ID and Combination.

2.

Navigate through the Main Menu and select “System”.

3.

Select Buzzer from the sub-menu.

«
...
17
18
19
20
21
...
»

Содержание LA GARD 700 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для LA GARD 700 Series

Бренд: LCN Страницы: 5

Бренд: ubbink Страницы: 61

Бренд: Sweiss Страницы: 89

Бренд: Kemppi Страницы: 31

TITANIUM 400 AC/DC

Бренд: GYS Страницы: 120

Бренд: jbc Страницы: 20

Бренд: WARPP Страницы: 11

Бренд: quadient Страницы: 328

Бренд: Häfele Страницы: 19

Бренд: Jasic Страницы: 36

Бренд: Dormakaba Страницы: 11

CITOARC 2200 VRD

Бренд: Oerlikon Страницы: 92

Бренд: GILGEN Страницы: 78

Бренд: Unimig Страницы: 52

Бренд: AOTAI Страницы: 32

Бренд: Matco Tools Страницы: 18

Warrior 750i CC/CV

Бренд: ESAB Страницы: 40

Бренд: Melu Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды