Dormakaba LA GARD 700 Series Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 76

background image

dormakaba USA Inc. System User Guide 7040.1121 Rev E 10/22 | 31

5

>

Open Lock and TDO Combination Privileges

7

>

Open Lock, Audit Lock, and TDO Combination Privileges

e.

Press <return key> (←)

•

Reset User Combination

– Allows a Master or Manager user to reset another user’s combination. Perform

the following actions using the Keypad:

a.

Input the pound key (#), then the number 57.

b.

The Authorized User ID and Combination.

c.

Input the User ID of the User whose Combination you want to change.

d.

Input a new Combination for this User.

e.

Repeat steps c and d, being careful to ensure that the User ID and Combination match the new
one you just entered.

f.

Press <return key> (←)

For more details, please refer to

(contains 701 model # commands) and

(contains 702

model # commands).

3.4.5 Delete User

3.4.5.1 Delete User – Display Keypad

Follow these steps to delete a User on a Display Keypad:

1.

Enter an Authorized User ID and Combination.

2.

Navigate through the Main Menu and select “Users”.

3.

From the sub-menu, select “Delete”.

4.

Input the User ID to be deleted.

5.

“Confirm delete” appears on screen. Press the <return key> (←) on the Keypad to confirm deletion.

6.

“User deleted” appears on screen. The Keypad will beep three times and flash a green LED once complete.

3.4.5.2 Delete User – Non-Display Keypad

Follow these steps to delete a User on a non-Display Keypad:

1.

Using the Keypad, input #56 + Authorized User ID and Combi User ID to be D <return key>
(←).

2.

The Keypad will beep three times and flash a green LED.

3.5 Install (Electronically Pair) a Lock and Keypad

The system requires that a lock and keypad be connected through an Install or pairing activity. This can be done
before or after the Keypad and Lock have been mounted to the safe. To facilitate test opening, physical fit
placement, it is recommended that you physically mount the Keypad and Lock prior to setting up the system.
Refer to the Safe Lock Installation Guide for detailed instruction on the physical mounting of the Lock and
Keypad. (7034.1121)

3.5.1 Install (Electronically Pair) Lock and OLED Display Keypad

Follow these steps to “INSTALL” (logically, electronically pair) a Safe Lock to an OLED Display Keypad:

1.

Press any button to Open factory setting Menu

2.

To test the opening of the lock, highlight “Open Lock” and press the <return key> (←).

«
...
30
31
32
33
34
...
»

Содержание LA GARD 700 Series













































































Отзывы:

Нет отзывов

Похожие инструкции для LA GARD 700 Series

SITALI CXOM 180

Бренд: Olimpia splendid Страницы: 32

Бренд: Autowel Страницы: 11

Бренд: H&S AUTOSHOT Страницы: 19

MASTER LOAD 750

Бренд: Lincoln Electric Страницы: 28

Бренд: Tokentools Страницы: 29

Бренд: Lincoln Electric Страницы: 35

Бренд: G-U Страницы: 20

Aristo Mig 3001i

Бренд: ESAB Страницы: 76

ABICOOLER 2000 advanced

Бренд: Abicor Binzel Страницы: 31

Бренд: Century Страницы: 27

Бренд: IMS Страницы: 44

Бренд: Ausmig Страницы: 24

Бренд: SHUFT Страницы: 34

Бренд: Boss Страницы: 31

JM-250S MIG Series

Бренд: Jasic Страницы: 20

Бренд: Dormakaba Страницы: 2

Бренд: Oerlikon Страницы: 27

Бренд: Baxi Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды