Doran GuardianXL, Инструкция по установке и эксплуатации

Страница: 66 / 87

65
Comm Port
Select the serial port your computer is using to connect to the GuardianXL (COM1,
COM2, COM3 or COM4).
Baud rate
Select the baudrate the GuardianXL indicator is set to. The default setting for the
GuardianXL indicator is 9600.
A uto Detect
The Auto Detect button will attempt to communicate with the GuardianXL, querying all
available comports at all baudrates. If auto detect queries a comport that is in use, it will
bypass that comport. Therefore ensure that any program that would access a comport is
disabled. The databits and parity will remain at 8n1. If Auto Detect does not
communicate with the GuardianXL indicator, check that you have a free comport
available and that the GuardianXL indicator parity parameter is set to 8n1.
Test
Use this button to confirm that the current comport and baudrate settings are correct and
that the GuardianXL indicator is communicating with your PC.
Terminal
The Terminal is a serial port communications program. Use it to verify that the
GuardianXL is transmitting and receiving data. Data transmitted from the scale will be
displayed in the right, Receive window. This will allow you to easily examine any
custom print strings. Data typed into the left, Transmit window is sent to the
GuardianXL. See Appendix A for print string and remote command information.
This window will not open if the scale is not communicating with your PC properly. See
Comm Settings above for comport configuration instructions.