Doran GuardianXL, Инструкция по установке и эксплуатации

Страница: 14 / 87

13
Scale ID (MENU – ID)
Allows entry of the scale ID number. To configure the scale ID, press MENU then
CLEAR. The secondary display will read “SET SCALE ID ENTER ID NUMBER”.
Simply enter the scale ID number – up to 6 digits and press ZERO to accept.
Accumulator and Counter (MENU – ACCUMULATOR)
This displays the value of the accumulator and counter. The maximum value for the
accumulator and counter is limited to six digits, i.e. 999999. When the maximum value
is reached, the accumulator will not accumulate and the secondary display will read
“ACCUMUALTOR ERROR”.
Press MENU 3 (ACC) to enter the accumulator recall mode. The secondary display will
read “GROSS ACCUM lb ACCUM RECALL”. The accumulator recall mode will
display the accumulator value in the units currently selected in the weigh mode as well as
either gross or net mode. To toggle between the gross and net values press the GROSS /
NET pushbutton. A net accumulator value can only be accessed by having an active tare
in the weigh mode.
To clear the accumulator and counter values, press CLEAR while in the accumulator
recall mode. The accumulator counter is incremented once every time a manual or
automatic accumulation occurs. The counter value cannot be displayed on the front
panel.
The counter value can be printed using the Fiber Optic option. When in accumulator
recall mode, press PRINT to execute a print string that contains the gross accumulated
weight, net accumulated weight and counter. See Appendix A, Accumulator Print String
for print string formatting.
Accumulating of weights is possible with an auto accumulate function. See Chapter 6,
Single Trigger Setpoint Configurations for an automatic accumulate configuration. To
exit the accumulator recall mode, press MENU.
Fiber Optic Communications Protocol (MENU – COMMUNICATIONS)
Pressing MENU then 4 (COMM) on the numeric keypad places the GuardianXL into the
setup mode. To exit to the weigh mode, press MENU. See Chapter 4, Communications
Parameters for configuration details.
Batch Programming (MENU – PROGRAM)
Pressing MENU then 5 (PRG) See Chapter 7 for batch mode programming information.
Date Time (MENU – DATE / TIME)
This allows recall of the current date and time. Press MENU to exit the date time recall
mode. To change the date and time see Chapter 4, Date Time Parameters.