Doran GuardianXL, Инструкция по установке и эксплуатации

Страница: 53 / 87

52
To configure the weight threshold enter 100 into the keypad, creating a 1.00 lb setpoint.
Press MENU, press 1 (SP) to save weight threshold 1. To review the threshold setting
press MENU, then 1 (SP), the threshold 1 value is displayed in the primary display.
While in the threshold review routine pressing 1, 2, 3 or 4 will recall and display the
current threshold values. Pressing TARE will recall the current tare value. Press CLEAR
to exit the threshold review routine.
Under Setpoint
CONFIG SET POINT = out 2
CONFIG OUTPUT CH = hI
CONFIG THRESH 1 = undEr
Auto Print
The GuardianXL allows the user to use predefined auto print functions by setting print
control parameters in the Communications Parameters section of the setup mode. If
standard auto print functions do not meet the needs for your application a custom one can
be configured using triggers.
CONFIG SET POINT = Print
CONFIG OUTPUT CH = hI
CONFIG THRESH 1 = ovEr
CONFIG STABILITY = STABLE
Additional triggers can be added to further customize the print command.
Auto Accumulate
Much like an auto print function, the GuardianXL can be configured to auto accumulate
weights, net or gross.
CONFIG SET POINT = ACCUM
CONFIG OUTPUT CH = hI
CONFIG THRESH 1 = ovEr
CONFIG STABILITY = STABLE
Manual Accumulate
The GuardianXL does not have an accumulate pushbutton for manual accumulations.
The F1 or F2 pushbuttons can be programmed to perform this feature. In the following
example when the user presses F1, the scale will accumulate the displayed weight.
CONFIG SET POINT = ACCUM
CONFIG OUTPUT CH = hI
CONFIG PB F1 = PrESS