022-00029AE Operation and Maintenance Manual
Operating Controls 2-43
3.
BASS/TREBLE CONTROL
This control adjust bass and treble tone levels.
To adjust treble tone level rotate control counterclockwise to decrease treble and clockwise to
increase treble.
To adjust bass tone level press on control and it will pop out. Rotate control counterclockwise to
decrease bass and clockwise to increase bass.
4.
AM/FM BAND SELECTION
This button sets radio to either AM-1, AM-2, FM-1 or FM-2 frequency bands. Each frequency bands
will enable the stereo to store 6 preset radio station frequencies. Each time the button is pressed the
stereo will move to the next band.
5.
AUTOMATIC MEMORY (AME)
This function automatically finds the six
strongest radio signals in the frequency
selected and stores them in memory.
Select band (AM-1, AM-2, FM-1, FM-2).
Press and hold AME button for
approximately two seconds and stereo will
search out strongest stations in area.
These stations can then be recalled by
pressing buttons (1 thru 6, Figure 89).
NOTE:
To manually store radio station
settings, use band selector to
select frequency band to be
listened to. Then use tuning
control to select desired station.
Press and hold any preset keys
for approximately 2 seconds; a
beep will sound when station
has been set.
6.
TAPE EJECT BUTTON
Eject tape from cassette deck by pressing this button. Stereo returns to tuner mode.
7.
CASSETTE SLOT
Press "ON/OFF" switch for power. Insert a tape with exposed tape facing right. The tape will start to
play. "TAPE" is displayed on LCD display.
8. & 9. PLAY DIRECTION BUTTON
Pressing this control button to either right or left will fast forward or rewind tape. The button will lock
into this position. To stop action, press opposite side button and tape will return to normal play mode.
Pressing both control buttons at the same time will reverse direction of tape.
10.
AUTOMATIC SELECTION
Press this control to change channels manually to either higher or lower frequencies.
HAOC990L
Figure 89
