022-00029AE Operation and Maintenance Manual
Safety 1-37
PRECAUTIONS WITH HIGH PRESSURE LINE, TUBES AND HOSES
When inspecting or replacing high-pressure piping or hoses, check that the pressure has been released
form the circuit. Failure to release the pressure may lead to serious injury. Always do the following;
•
Wear protective glasses and leather gloves.
•
Fluid leaks from hydraulic hoses or pressurized components can be difficult to see but
pressurized oil has enough force to pierce the skin and cause serious injury. Always use a piece
of wood or cardboard to check for suspected hydraulic leaks. Never use your hands or expose
your fingers.
•
Do not bend high pressure lines. Do not strike high pressure lines. Do not install lines, tubes or
hoses that are bent or damaged.
•
Make sure that all clamps, guards and heat shields are installed correctly to prevent vibration,
rubbing against other parts, and excessive heat during operation.
–
If any of the following conditions are found, replace the part.
–
Damage or leakage from hose end.
–
Wear, damage, cutting of covering, or exposure of strengthening wire layer.
–
Cover portion is swollen in places.
–
There is twisting or crushing at movable parts of hose.
–
Foreign material is embedded in the covering.
–
Hose end is deformed.
OBTAIN IMMEDIATE MEDICAL ATTENTION IF PRESSURIZED OIL PIERCES SKIN.
WARNING!
Failure to obtain prompt medical assistance could result in gangrene or other serious damage to
tissue.
HAOA420L
O
X
X
Figure 32