4-6 Inspection, Maintenance and Adjustment
022-00029AE Operation and Maintenance Manual
MAINTENANCE INTERVALS
10 HOUR / DAILY SERVICE
•
Grease Front Attachment Pins (See page
4-8)*
•
Inspect All Tires for Correct Tire Pressure
and Signs of Damage or Abnormal Wear
(See page 4-8)
•
Check Engine Oil Level (See page 4-8)
•
Check Transmission Oil Level (See page
4-9)
•
Check Hydraulic System Oil Level (See
page 4-10)
•
Check for Leaks in the Hydraulic System
(See page 4-11)
•
Refill Fuel (See page 4-12)
•
Check for Leaks in the Fuel System (See
page 4-12)
•
Drain Fuel Condensation (See page 4-12)
•
Check Coolant Level (See page 4-13)
•
Check Antifreeze Protection Levels (See
page 4-14)
•
Check Level of Window Washer Fluid (See
page 4-14)
•
Inspect the Bucket Teeth and Side Cutters
for Signs of Wear (See page 4-14)
•
Inspect Seat Belt for Proper Operation (See
page 4-14)
•
Inspect the Structure for Cracks and Faulty
Welds (See page 4-14)
•
Check the Operation of All Switches (See
page 4-15)
•
Check the Operation of All Exterior Lights,
Horn and Control Console Indicator and
Monitor Lights (See page 4-15)
•
Start Engine, Check Starting Ability, and
Observe Exhaust Color at Start-up and at
Normal Operating Temperature. Listen for
Any Abnormal Sounds (See page 4-15)
•
Check Operation of All Controls (See page
4-15)
•
Inspect Engine Fan Blade (See page 4-16)
•
Check Engine Drive Belt Wear (See page
4-16)
•
Check Air Intake System (See page 4-17)
•
Check Crankcase Breather Tube (See
page 4-17)
50 HOUR / WEEKLY SERVICE
•
Perform All 10 Hour / Daily Service Checks
(See page 4-18)
•
Grease Front Attachment Pins (See page
4-18)
•
Grease Steering Cylinder Rod and Base
Ends (See page 4-23)
•
Grease Upper and Lower Center Pins (See
page 4-23)
•
Change Engine Oil and Filter (Initial) (See
page 4-23)*
•
Hydraulic Full Flow Filter Replacement
(Initial) (See page 4-24)*
•
Check Water Pump Belt Tension -
Alternator, and Air Conditioner Belt (Initial)
(See page 4-24)*
•
Clean Exterior of Radiator, Oil Cooler and
Air-conditioner Evaporator (See page 4-24)
* Break-In