022-00029AE Operation and Maintenance Manual
Safety 1-17
INJURY FROM WORK EQUIPMENT
Do not enter or put your hand, arm or any other
part of your body between movable parts, such
as between the work equipment and cylinders,
or between the machine and work equipment.
If the control levers are operated, the clearance
between the machine and the work equipment
will change and this may lead to serious
damage or personal injury.
If going between movable parts is necessary,
always position and secure the work equipment
so that it cannot move.
FIRE EXTINGUISHER AND FIRST AID KIT
As a precaution if any injury or fire should occur,
always do the following.
•
Be sure that fire extinguishers have
been provided and read the labels to
ensure that you know now to use
them. It is recommended that an
appropriately sized (2.27 kg [5 lb] or
larger) multipurpose "A/B/C" fire
extinguisher be mounted in the cab.
Check and service the fire
extinguisher at regular intervals and
make sure that all work site crew
members are adequately trained in
its use.
•
Provide a first aid kit in the storage compartment and keep another at the work site. Check the
kit periodically and make any additions if necessary.
•
Know what to do in case of injury from fire.
•
Keep emergency numbers for doctor, ambulance service, hospital and fire department near
your telephone.
If the machine catches fire, it may lead to serious personal injury or death. If a fire occurs during operation,
escape from the machine as follows;
•
Turn the starter switch "OFF" and stop the engine.
•
If there is time, use the fire extinguisher to extinguish as much of the fire as possible.
•
Use the handrails and steps to escape from the machine.
The above is the basic method for escaping from the machine, but changing the method may be
necessary according to the conditions, so carry out practice drills at the work site.
HDO1010L
Figure 9
HDO1009L
Figure 10
