1-34 Safety
022-00029AE Operation and Maintenance Manual
WELDING REPAIRS
When carrying out welding repairs, carry out the welding in a properly equipped place. The welding should
be performed by a qualified worker. During welding operations, there is the danger of, generation of gas,
fire, or electric shock, so never let an unqualified worker do welding.
The qualified welder must do the following;
•
To prevent explosion of the battery, disconnect the battery terminals and remove batteries.
•
To prevent generation of gas, remove the paint from the location of the weld.
•
If hydraulic equipment, piping or places close to them are heated, a flammable gas or mist will
be generated and there is danger of it catching fire. To avoid this, never subject these places to
heat.
•
Do not weld on pipes or on tubes that contain flammable fluids. Do not flame cut on pipes or on
tubes that contain flammable fluids. Before you weld on pipes or on tubes or before you flame
cut on pipes or on tubes, clean the pipes or tubes thoroughly with a nonflammable solvent.
•
If heat is applied directly to rubber hoses or piping under pressure, they may suddenly break so
cover them with a fireproof covering.
•
Wear protective clothing.
•
Make sure there is good ventilation.
•
Remove all flammable objects and provide a fire extinguisher.
PRECAUTIONS FOR REMOVAL,
INSTALLATION, AND STORAGE OF
ATTACHMENTS
Before starting removal and installation of
attachments, decide the team leader.
Do not allow anyone except the authorized
workers close to the machine or attachment.
Place attachments that have been removed
from the machine in a safe place so that they do
not fall. Put up a fence around the attachments
and take other measures to prevent
unauthorized persons from entering.
HDO1041L
Figure 30
