4-8 Inspection, Maintenance and Adjustment
022-00029AE Operation and Maintenance Manual
10 HOUR / DAILY SERVICE
GREASE FRONT ATTACHMENT PINS
NOTE:
Fittings are greased daily, or every 10 hours, for the first 100 hours of operation to comply
with new machine break-in requirements. After that, greasing should be done every 50
hours. If bucket is being used in water, grease fittings immediately after machine is
removed from water. Follow procedure printed under the 50 hour maintenance interval
“Grease Front Attachment Pins” on page 4-18.
INSPECT ALL TIRES FOR CORRECT TIRE PRESSURE AND SIGNS OF DAMAGE OR ABNORMAL
WEAR
1.
Inflate tires to proper operating pressure for working conditions. See “Tires and Wheels” on
page 4-57.
CHECK ENGINE OIL LEVEL
NOTE:
When checking level using a dipstick always remove and wipe it clean before making final
level check.
1.
Check level of engine oil every day before
starting engine.
2.
Remove engine oil dipstick. (Figure 4). Oil
level must be between "LOW" and "FULL"
marks.
NOTE:
If oil is above "HIGH" mark on
dipstick, some must be drained
to return oil to proper level.
3.
To add oil, remove engine oil fill cap
(Figure 5).
Figure 4
ENGINE OIL DIPSTICK
Figure 5
ENGINE OIL FILL CAP
