022-00029AE Operation and Maintenance Manual
Inspection, Maintenance and Adjustment 4-1
4
INSPECTION, MAINTENANCE AND
ADJUSTMENT
PREVENTIVE MAINTENANCE
Periodic checks and replacement of oil, grease, filters, etc. must be made at specific intervals, to keep
machine in good working condition. The following pages describe items to be checked, lubricants to be
used, and time interval between each check.
NOTE:
Time interval between each service check may need to be shortened if machine is
operating in severe atmospheric conditions. Machines working in extremely hot or dusty
conditions will require more frequent service checks. Total hours of machine operation are
determined by hour meter that is on the front instrument panel.
SERIAL NUMBERS
There are two serial number plates attached to
the body of wheel loader.
Please make note of these numbers and their
locations. These will be required whenever
warranty service work is requested.
Main Serial Number
Main serial number plate is on left side of front
frame above fender (Figure 1).
The number is also stamped in the rear frame
on the left side just below the cab (Figure 2).
Figure 1
Figure 2
