Structure and Operation
56
D760.H03E-001.H1907
Light knob switch
Knob switch
The knob is shown in figure 6 of H-D760-
016.You can rotate and push buttons. When
rotating, the position light and headlight gear
can be selected, and the fog light can be
switched on and off by pressing down and pull-
ing up.
Light knob - position light
When the knob is rotated to this position, all
position lights (front lamps) will be lit, including
the following lamps:
Front position light, front end-outline light,
rear position light, rear end-outline light, side
marker light, license plate light.
When the knob is turned to this point, the
default is to turn on the low beam light. To switch to the high beam light, you need to
lift the combination switch.
Fog lamp operation
The light knob switch must be in position light or headlight gear.
Press the button to turn on the front fog light and press it again to turn on the rear
fog light; The button is pulled up to turn off the rear fog light and pulled up again to turn
off the front fog light.
Electric adjustment of front headlights
When the vehicle is empty, adjust the light to the specified position, and the
switch gear is at 0. After loading the vehicle, the light inclination angle will rise, adjust
the switch 1, 2 and 3 gears downward, and then the inclination angle will drop to meet
the regulations.
Switching visibility
The light knob switch has backlight
The headlight switch has backlight
Electric adjustable headlight switch
When the vehicle is under no-load opera-
tion, adjust the light to the standard position. At
this time, the switch position should be set at 0.
After the vehicle is loaded, the lighting angle will
rise, adjust the switch to 1,2, and the tilt angle
will drop to comply with the regulations.
1. Front and rear fog
lamp and backlight
2. Light knob OFF gear
3. Light knob position light gear
4. Light knob headlamp gear
5. Front headlight electric adjusting
switch
6. Knob