Structure and Operation
D760.H03E-001.H1907
109
Warning:
In the following cases, abnormal state of the forward-looking camera may
cause abnormal lane departure warning and forward collision warning
function.
1. If the camera is affected by external forces and its position or Angle
changes, it shall return to the service station to calibrate the camera
again;
2. There is a foreign body on the glass surface covering the camera's
field of view, which may affect the camera's field of view;
3. The windshield area in the camera's field of view is covered with film;
4. Wiper on.
Blind spot detection (BSD)
Blind spot detection function when the vehicle is driving at a low speed, based on
the image collected by the right view camera, the target in the blind spot on the right
side of the vehicle is detected, and the target in danger of collision is alerted and
reminded to the driver.
Warning:
The BSD function can only serve as a reminder, not in all cases, and can-
not replace the judgment of the driver, who is always responsible for safe
driving.
The BSD function is on by default, and the control function on the vehicle is on or
off. After the function is off, the indicator light on the instrument will be on and the
BSDS system will be turned off.
When the BSD function is turned on and the speed is between 5 and 30km/h, the
BSD function is activated to detect the target object in the blind area on the right side
or close to it, and to distinguish the driver's steering intention for different alarms.
The function of BSD is mainly applied to low-speed highways such as urban,
suburban and national highways under normal weather and illumination. In some spe-
cial conditions, the correctness of function alarm cannot be guaranteed.
Driving intention
To distinguish the way
Alarm way
No turning, straight ahead
Right turn signal not on
First alarm
turning
Turn on the right signal
The secondary alarm
