Structure and Operation
D760.H03E-001.H1907
107
There are two alarm levels of the forward collision warning function, namely,
keeping vehicle distance warning and imminent collision warning. Please refer to the
following table for details:
1. When the vehicle speed does not reach the
starting speed, the FCW function is in
standby state and will not send alarm; When
the vehicle speed reaches the starting
speed, the FCW function is activated. At this
time, the front of the vehicle can be detected
in real time, and the alarm information can
be sent out in case of collision risk. When the
alarm is raised, the alarm icon on the dash-
board is flashing.
2. FCW function supports the detection of tar-
get vehicles including cars, suvs, trucks,
buses, etc.; FCW function is suitable for
standard lanes with road radius
≥
250m.
Warning:
This function only detects the target vehicle in the camera's field of view
and may give a false alarm when there is no danger of collision. In addi-
tion, although there is a collision risk, there may be no alarm. The recog-
nition capability of the camera may be limited in the following situations,
where the image collected by the camera may be unclear, which may
cause the FCW function to fail to identify the target vehicle or make an
error identification.
Alarm level
Start the speed
prompt
meaning
Keep distance
reminders
60 km/h
Frequency
response
At this point the driving speed is
faster, and close to the car in
front of the trend
Impending col-
lision alarm
30 km/h
shortness
Too close to the car ahead,
please slow down
