Maintenance & Adjustment
D760.H03E-001.H1907
205
Auxiliary Power Starting
In case the battery is discharged and the engine cannot be started, start the vehi-
cle by auxiliary power. The connecting prºCedures are as follows:
1. Shut down the engine of the vehicle equipped with a well charged battery.
2. Connect one end of the booster cable (red) to the positive terminal of the dead
battery, and the other end to the positive terminal of the live battery. Connect one
end of another booster cable (black) to the negative terminal of the well charged
battery, and the other end to the chassis frame of the vehicle equipped with dead
battery and keep it far from the battery.
3. After connecting the booster cables, start the engine of the vehicle equipped with
the dead battery.
4. After the engine being started, remove the cables in the prºCedures reverse to the
wiring prºCedures.
CAUTION:
1.This way can be used in emergency only because it is liable to cause
fuse burning of charging circuit. Under normal conditions, dismount
the battery to charge it when the battery is out of power.
2.Prevent power short circuit during removal and refitting of booster
cable.
3.Failing to observe the above rules in the event of auxiliary power
starting may damage the vehicle electronic devices.
4.Do not start the vehicle with the battery of 36 V, 48 V or higher voltage
in any case; otherwise, these batteries will damage electronic devices
directly. The driver and service staff must observe this rule.
1. Negative power cord
2. Positive power cord
3. Booster cable (red)
4. Booster cable (black)
5. Starter power
