Fuse box
D760.H03E-001.H1907
147
e). Open the cable socket cover of the
trailer, and then align the protruding
portion of the cable across the socket
with the socket's notch so that the plug is
fully inserted into the socket. Finally
close the socket and the plug is fixed.
Pre-hanging state: the handle bar is
stuck on the bayonet at the edge of the
saddle shell, and the lock car is in a horizontal state
f). If the trailer is equipped with ABS
braking system, connect the trailer with
ABS cable.
g). Please connect the two hose connectors
for the delivery of compressed air from
the tractor to the trailer respectively with
the connector corresponding to the
trailer.
CAUTION:
Never connect wrong hose connec-
tors.
h). Make sure the trailer's gas path and
circuit are working properly.
i). Pull up the supporting pin of the trailer.
j). Remove the parking brake of the trailer
and remove the triangle plank.
3. Hang off:
1). Lower and support the supporting feet of the trailer.
2). Remove jumper cables and hoses. After the hose is removed, the trailer is
automatically stopped, and the exhaust valve of the trailer's air storage
cylinder is opened to vent the air.
3). Pull out the lever assembly;
4). Place the notch on the handle bar on the bayonet at the edge of the saddle
shell (the traction seat is in the pre-hanging state);
5). drive the tractor slowly forward so that the semitrailer's towing pin is
completely free from the lock hook through the saddle V port.
