Structure and Operation
108
D760.H03E-001.H1907
Warning:
1. Severe weather conditions lead to poor visibility, such as fog, haze,
rain, snow, etc.;
2. Insufficient light in the camera field, such as no street lamp at night; 3.
Bright light ahead;
4. The view of the camera is blocked by snow, ice, dirt, water or other
objects;
5. Sharp changes in light, such as in and out of a tunnel;
6. Violent jolting and shaking
Warning:
In the following cases, when the target vehicle is in abnormal state or
there is a disturbance ahead, the FCW function may be interfered with,
which may cause the target vehicle to be unable to be identified, or make
a wrong identification.
1. There are stationary or slow-moving vehicles at the curve ahead of the
vehicle;
2. Quick line change;
3. The shape of the target vehicle is abnormal, such as special models
(forklift, crane, etc.);
4. There are vehicles moving rapidly from other lanes to the front of the
vehicle.
System failure
When the system is not calibrated or the internal controller, camera and shielding
wire are not in good contact or damaged, the system will enter the failure alarm. When
the failure alarm is given, the alarm icon of the instrument will be always on, and there
will be a fault code prompt.
System shut down
When the LDWS is closed, the meter displays
; When FCWS is off, the
meter displays
.
Impact of camera on lane departure warning and forward collision warning sys-
tem
The lane departure warning and forward collision warning functions were previ-
ously based on the image recognition of the camera, and only when the camera was
in normal state could the system function be in the best state. Do not place or paste
any objects in the field of view in front of the camera. In addition, if the windshield is
replaced and the camera is reinstalled, please go to the service station to calibrate the
lane departure warning and forward collision warning.