Maintenance & Adjustment
182
D760.H03E-001.H1907
Inspection of sliding function
Applicable to Haldex disc brake only.
1. Park the vehicle safely, and remove wheels of the brake axles to be inspected;
2. Remove the brake pad;
3. Grasp the brake caliper with hand firmly at the position easy for pushing and
pulling it to move axially;
4. Push and pull the brake caliper with hand to check if it can slide smoothly;
5. If the brake caliper can slide smoothly, it works normally; otherwise, perform
troubleshooting of the brake.
Inspection of sliding pin rubber sleeve
Applicable to Haldex disc brake only.
Check protective sleeves and 6 silicon rub-
ber sleeves at both ends, as well as the protec-
tive cover. If any cracks or other damages are
found, replace the part immediately.
1. locking bolt
2. Pressure plate
1. Plug
1. Protective cover
2. Silicon rubber sleeve