DOMUSA Fusion Hybrid Gas Condens, Инструкция по установке и эксплуатации

Страница: 41 / 76

39
39 39
39
12.6 12.6 12.6 12.6 Air purge Air purge Air purge Air purge ffffunct unct unct unction ion ion ion
The air purge function is activated by pressing and holding the RESE RESE RESE RESET TT T buttons and until the
circle is completed while the module is OFF. After activation of this function, the pump and 3-way
valve are activated and deactivated to drain the air from the installation.
WARNING WARNING WARNING WARNING
This procedure must be performed by authorised personnel of
DOMUS
DOMUS DOMUS
DOMUSA TEKNIK
A TEKNIK A TEKNIK
A TEKNIK
.
Make sure that the pressure in the module is adequate and that the automatic drain cover is open.
If the water pressure decreases during the purge procedure, use the fill valve to fill the installation
until the pressure is adequate.
The module must be in the OFF mode to perform the purge
procedure.
Press RESET RESET RESET RESET and simultaneously to complete the circle and
perform the purge procedure.
The "Air" mode appears on the display. The module starts the purge
function. During this procedure, the pump and 3-way valve are
activated/deactivated to eliminate air from the hydraulic system.
The purge function ends in 12 minutes.
To exit the purge mode, wait for the 12 minutes of the function lasts
or press
RESET RESET RESET RESET and simultaneously until the circle is completed.