DOMUSA Fusion Hybrid Gas Condens, Инструкция по установке и эксплуатации

Страница: 19 / 76

17
17 17
17
4.9 4.9 4.9 4.9 Combust Combust Combust Combustiiiion product removal on product removal on product removal on product removal
The combustion product exhaust ducts must be installed by qualified personnel and must comply
with current legislation and standards.
The Fusi Fusi Fusi Fusion Hybrid Gas Condens on Hybrid Gas Condens on Hybrid Gas Condens on Hybrid Gas Condens module is a sealed oil-fired boiler, and the combustion products
are therefore removed through an outlet pipe, with a separate air intake from outside. We
recommend that the position of the outside exhaustion duct is as shown in the figures and in the
table below:
Ga
Ga Ga
Gas
s s
s removal
removal removal
removal te
te te
termi
rmi rmi
rmin
n n
nal position
al position al position
al position
Mi Mi Mi Minimum distance nimum distance nimum distance nimum distance
(c
(c (c
(cm)
m) m)
m)
A
A A
A From openings (e.g. doors, windows, ventilation grilles) 60(*)
B B B B Under a cornice or drainpipes 30
C C C C Under a gutter 30(**)
D D D D Under a balcony 30
E EE E From vertical or horizontal pipes 30(**)
F FF F From internal and external corners of the building 30
G
G G
G From the ground, roof or balconies 250
H H H H From the side opposite to a marquee (when no other outlet is installed) 60
IIII From the wall with the pipe to the front wall 120
JJJJ From openings (e.g. doors, windows) under the roof 120
K K K K Between two vertical ducts 150
llll Between two horizontal ducts 100
M
M M
M From an adjacent vertical duct 50
N N N N From a front surface with openings 200
(*) (*) (*) (*) The end of the removal duct must be at least 40 cm from any opening in the façade.
(* (* (* (**) *) *) *) If the pipe is made of materials sensitive to the action of the combustion gases, this distance should be at least 50 cm.