DOMUSA TEKNIK DUAL CLIMA R, Инструкция по установке и эксплуатации

Страница: 44 / 84

EN
44 DUAL CLIMA R
9 STATUS MENU
Using the C parameters of the STATUS Menu ( 1 ), it is possible to view and check the status of all the
control and safety components of the heat pump at all times, as well as the values of some operating
parameters. The
C parameters are display parameters and, thus, will not be modifiable, being used to
diagnose the operation of the machine during maintenance and repair. To access them, follow the steps
below:
To access the C parameters of the status menu, press the STATUS touch button on the home screen. By
means of the and buttons, the user can navigate through all the C parameters, and their value
will be displayed at all times on the screen.
To exit the C parameters display and return to the home screen, press the touch button. .
NOTE: The parameters indicated in the table as "Reserved" are parameters that do not apply
to these heat pump models.
Code Definition Unit Range
C00 Coil temp °C
C01 Compressor discharge temp(AIN1) °C
C02 Ambient temp °C
C03 HP AC outlet water temp °C
C04 DHW tank temp °C
C05 Reserved
C06 Reserved
C07 DIN6 status 0/1 0: Connected, 1: Disconnected
C08 DIN5 status 0/1 0: Connected, 1: Disconnected
C09 Sterilization status 0/1 0: off, 1: on
C10 High pressure switch status 0/1 0: Connected, 1: Disconnected
C11 Mid pressure switch status 0/1 0: Connected, 1: Disconnected
C12 Low pressure switch status 0/1 0: Connected, 1: Disconnected
C13 Reserved
C14 Reserved
C15 Compressor overcurrent protect switch status 0/1 0: Connected, 1: Disconnected
C16 Defrosting 0/1 0: off, 1: on
C17 AC Antifreeze 0/1 0: off, 1: on
C18 DHW antifreeze 0/1 0: off, 1: on
C19 Compressor running frequency Hz
C20 ASHP outdoor fan/ GEO HP water source pump 0/1 0: off, 1: on
C21 Compressor heater 0/1 0: off, 1: on
C22 4-way valve 0/1 0: Cold, 1: Heat
C23 Bypass valve 0/1 0: off, 1: on
C24 Reserved