DOMUSA TEKNIK DUAL CLIMA R, Инструкция по установке и эксплуатации

Страница: 12 / 84

EN
12 DUAL CLIMA R
Manual). The heat pump will turn on and activate the operation mode selected in the thermostat
(Heating or Cooling) until the temperature set in the room thermostat is reached. When the desired
temperature in the home is reached, the heating or cooling service of the installation will be disabled,
shutting down the operation of the heat pump. The screen of the electronic controller will display the
icon, showing that the heat pump has been switched off by the room thermostat (Standby).
In the following table it is described the functioning of Dual Clima R heat pump in "AUTO" mode,
depending on the remote mode selection made by the Heating/Cooling thermostat:
Thermostat
selection
Dual Clima R
Dual Clima
Mainboard
Heating
Only Heating mode: The heat pump activates the Heating mode.
Heating and DHW combi mode: The heat pump will activate the
Heating mode, as long as it has been reached the temperature
desired in the DHW tank.
+
Cooling
Only Cooling mode: The heat pump activates the Cooling mode.
Cooling and DHW combi mode: The heat pump will activate the
Cooling mode, as long as it has been reached the temperature desired
in the DHW tank.
+
OFF
(Stand By)
Heating or Cooling modes: When the desired room temperature is
reached inside the house or the room thermostat is deactivated, if it
has this function, the Heating or Cooling service will be deactivated.
/ +
Heating or Cooling and DHW combi modes: When the desired room
temperature is reached inside the house or the room thermostat is
deactivated, if it has this function, the Heating or Cooling service will
be deactivated, remaining the DHW mode enabled.
/ +
+
4.8 Operation with room thermostats
The DUAL CLIMA R heat pump incorporates 2 connections prepared for the installation of a room
chrono-thermostat or room thermostat (see
"Room Thermostat Installation"
), what will allow the
operation of the heat pump to be controlled depending on the room temperature inside the home. One
connections is intended to manage the Heating mode and the other to manage the Cooling mode.
Optionally,
DOMUSA TEKNIK offers a wide range of such devices in its product catalogue.
The operation with the room thermostat will not affect the DHW service, keeping it enabled regardless
of the status of the thermostat.
The installation of a room thermostat will optimise the installation’s performance, adapting the heating
or cooling to the requirements of your home and obtaining enhanced comfort. Additionally, if the
thermostat allows the operating hours to be programmed (chrono-thermostat), it can adapt the
installation to the hours of use of the installation.
Operation with 2 room thermostats
In case of having installed 2 room thermostats simultaneously (one for Heating and other one for
Cooling) (see
"Room Thermostat Installation"
), once installed, select the desired temperature and
operating periods, if it is a chrono-thermostat (see the Room-Thermostat Manual). The heat pump will
turn on and activate the operation mode for which has been installed the room thermostat (Heating or
Cooling) until the temperature adjusted is reached. When the desired temperature in the home is
reached, the heating or cooling service of the installation will be disabled, shutting down the operation
of the heat pump. The screen of the electronic controller will display the icon, showing that the heat
pump has been switched off by the room thermostat (Standby).