www.LifeIonizers.com
14
75
DOLPHIN
Automatic Backwash Valve Quick Set-Up Guide
Your Dolphin Whole Home System’s automatic backwash valve
has four cycles (a double backwash and a double rinse). The
valve control has a “child proof” configuration which requires
the depressing of the required setting button for a 3-5 second
period before being able to change any setting. This feature
prevents “accidental” changing of the settings.
Basic Operations
A
BLUE
status light indicates all is normal. The LED window
will normally be indicating the “Time of day”.
A
GREEN
status light indicates when the unit is in a Backwash
(regeneration) mode, unless an error condition exists.
(LED will
indicate which cycle is in operation).
A
RED
status light illuminates when there is an error condition.
For normal day to day valve operation you will see the Blue
light and the LED time of day window will indicate the follow-
ing: “SRV” telling you the valve is “In Service”, the Time of Day,
and how many days until the next “REGEN”
(Backwash)
will
take place.
If the “time of day” is blinking, it is an indication there was a
power interruption to the valve. The reason the time is blink-
ing is to draw your attention to this fact, and is asking you
to verify that the time displayed on the LED is correct. If it is
correct, press either the up or down button one time. If the
time is not correct, see “Set Time of Day” below. The valve
computer is capable of keeping the correct time of day for up
to 12 hours of power loss. However, the valve itself will not
function without power.
