Dodge ZB 2005, Руководство по обслуживанию

Страница: 318 / 1873

MULTI-FUNCTION SWITCH -
EXPORT
DESCRIPTION
The multi-function switch is secured to the upper
steering column housing at the top of the steering
column, just behind the steering wheel (Fig. 21). The
visible parts of the multi-function switch are the turn
signal control stalk w/exterior lighting controls that
extends through a dedicated opening in the left side
of the upper steering column shrouds, the windshield
wiper/washer stalk that extends through a dedicated
opening in the right side of the upper steering col-
umn shrouds, and the hazard warning switch push
button that protrudes through an opening in the
upper steering column shroud on the top of the steer-
ing column. The remainder of the switch, its mount-
ing provisions, and its electrical connections are all
concealed beneath the steering column shrouds. The
multi-function switch control stalk has both nomen-
clature and International Control and Display Sym-
bol graphics applied to it, which identify its many
functions. An International Control and Display Sym-
bol icon for “Hazard Warning” is applied to the top of
the hazard warning switch push button.
The switch housing and its controls are constructed
of molded black plastic. A connector receptacle with
up to twenty terminals is located on the back of the
switch housing and connects the switch to the vehicle
electrical system through a take out and connector of
the instrument panel wire harness.
The multi-function switch supports the following
functions and features:
•
Continuous Wipe Modes - The control knob of
the multi-function switch provides two continuous
wipe switch positions, low speed or high speed.
•
Intermittent Wipe Mode - The control knob of
the multi-function switch provides an intermittent
wipe mode with multiple delay interval positions.
•
Washer Mode - The control stalk of the multi-
function switch provides washer system operation
when the button is pulled towards the driver.
•
Wiper Mist Mode - Mist will cycle wipers when
stalk is pulled down.
•
Hazard Warning Control - The internal cir-
cuitry and hardware of the multi-function switch pro-
vide detent switching for activation and deactivation
of the hazard warning system.
•
Exterior Lighting Control - The internal cir-
cuitry and hardware of the multi-function switch pro-
vides an input to the BCM and the BCM controls for
activation and deactivation of exterior lighting.
•
Headlamp Beam Selection - The internal cir-
cuitry and hardware of the multi-function switch pro-
vides an input to the BCM and the BCM controls
detent switching for selection of the headlamp high
or low beams.
Fig. 21 MULTI-FUNCTION SWITCH
1 - TURN SIGNAL CONTROL STALK 5 - CANCELLING CAM
2 - HAZARD WARNING SWITCH 6 - PANEL DIMMER/INTERIOR LIGHT SWITCH
3 - WINDSHIELD WIPER/WASHER CONTROL 7 - EXTERIOR LIGHTING CONTROL/FOG LAMP
4 - WINDSHIELD WIPER/WASHER SWITCH RETAINING SCREWS
ZB
LAMPS 8L - 23