Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 73 / 553

Voice/Videophone Calls
Note
• Do not include pauses, etc. to the prefix. If they are present, the
call cannot be connected with prefix.
Sub address setting
Making a Call Specifying a Sub
Address
You can set whether digits after "
:
" is identified as a sub
address when entering a phone number with "
:
". A sub
address is used to access a specific device connected to an
ISDN line or to select contents on "V-live".
a
M
▶ "Settings" ▶ "Call/VT/Dialing" ▶
Move the cursor to "Sub address setting" ▶
C
[ON/OFF]
ON
: Identify the address after "
:
" as a sub address.
OFF
: The address after "
:
" is not identified as a sub address.
Note
• "
:
" is not identified as a delimiter of a sub address if:
- "
:
" is entered at the beginning of the phone number.
- A specific number such as "184" or "186" is entered at the
beginning of the phone number and "
:
" is entered right after it.
Reconnect alarm
Setting an Alarm until
Connection is Reestablished
You can set an alarm that keeps sounding until a voice
or videophone call is reconnected when the call was
disconnected due to weak signals.
a M
▶ "Settings" ▶ "Call/VT/Dialing" ▶ "Call
feature" ▶ "Reconnect alarm" ▶ Select an
Alarm
Alarm OFF : Mute an alarm.
Low alarm : Set to low alarm.
High alarm : Set to high alarm.
Note
• Available duration for reconnection varies depending on the
status of usage and signal.
• If the signal suddenly worsens, the call may be disconnected
without the alarm sounding.
• The call charge applies during the reconnection attempt.
• While the call is disconnected, the other party hears nothing.