Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 111 / 553

0
Sound/Screen/Light Settings
Call & Mail image
Setting Image for Incoming Calls
Set an image displayed on the screen for incoming calls, etc.
a
M
▶ "Settings" ▶ "Display" ▶ "Call & Mail
image"
b
Perform the following operations
•
M
[Preview]: The preview screen of the selected image is
displayed, and press
Q
to stop the preview.
[Incoming voice call]
Set an image displayed on the screen when a voice call arrives.
Image : Select an image saved in "My picture" of "Data box".
→P296
i-motion : Select a moving picture/i-motion saved in "i-motion" of
"Data box".→P307
[Incoming video call]
Set an image displayed on the incoming videophone call screen.
• Available items are the same as for "Incoming voice call".
[Mail sending]
Select an image displayed when sending a mail from "My picture" of
"Data box".→P296
[Mail receiving]
Select an image displayed when receiving a mail and MessageR/F
from "My picture" of "Data box".→P296
[Mail complete]
Set an image displayed on the completion of receiving a mail and
MessageR/F.
• Available items are the same as for "Incoming voice call".
[Check new messages]
Select an image displayed on the completion of checking new
message from "My picture" of "Data box".→P296
c
I
[Done]
Note
• A sound only moving picture/i-motion cannot be set to the
incoming call screen.
• If a moving picture/i-motion with sound is set to the incoming
call screen, the "Select ring tone" (P100) is also changed to the
same.
• If a moving picture/i-motion with sound is set as an incoming
image, the ring tone settings are automatically reset to the
default when you change it to a still image or moving picture/
i-motion without sound.
Quick dial
Setting Dialing Screen Display
Set whether to search and display the Phonebook entry
corresponding to the memory number when entered between
a 1-digit and 2-digit number in Stand-by.
a
M
▶ "Settings" ▶ "Display" ▶ Move the
cursor to "Quick dial" ▶
C
[ON/OFF]