Docomo L-06A Prime Series, Инструкция по эксплуатации

Страница: 126 / 553

Security Settings
Self mode
Stopping All Incoming/Outgoing
Transmissions
You can disable all network functions, such as making/
receiving calls, using i-mode, or sending/receiving mails.
Infrared data communication is also unavailable.
a M
▶ "Settings" ▶ "Call/VT/Dialing" ▶ "Self
mode" ▶ "Yes"/"No"
Note
• Self mode is deactivated if you call an emergency number
("110", "119", or "118").
• While Self mode is activated, callers will hear a message
indicating that the FOMA terminal is turned off or out of service
area.
• The Voice mail service and the Call forwarding service still work
in Self mode.
• All mails and MessageR/F received while in Self mode are
stored at the i-mode center and SMS is stored at the SMS
center. To receive them, deactivate Self mode and check new
messages/SMS.
• If a call arrives while Self mode is activated, a missed call icon
does not appear on the Stand-by display after the Self mode is
deactivated.
Data access lock
Restricting Display of
Phonebook and Schedule etc.
You can lock specified functions to reject the use unless the
Terminal security code is entered, or restrict the use of the
FOMA terminal.
a M
▶ "Settings" ▶ "Lock/Security" ▶ "Lock"
▶ "Data access lock" ▶ Enter the Terminal
security code ▶ Perform the following
operations
[Data access lock]
Set whether to activate the Data access lock.
[Phonebook] *
Set to disable the Phonebook until the Terminal security code is
entered.
• In the Redial list or logs, the phone number or mail address of the
caller/sender will be displayed instead of the name saved in the
Phonebook.
• Receiving Phonebook entries using infrared communication
becomes unavailable.
[Data box]
*
Set to disable the files in Data box until the Terminal security code
is entered.
• Receiving data such as images or melodies to be saved in Data box
using infrared communication becomes unavailable.
[Record message]
*
Set to disable the Record message until the Terminal security code
is entered.
• If the Record message is set to "ON" and locked,
does not
appear in the Stand-by display even when a message is recorded.